Home » RFID Accessories, Active and Passive RFID Tags.

RFID Accessories, Active and Passive RFID Tags.

by Robert Boone
RFID Accessories

In addition to the RFID tags themselves, RFID accessories can include things like a charging station, docking-station, spare battery, RS232 serial cable, c battery packs, and vehicle mounts. Other RFID accessories include rubber boots, belt holsters, and protective covers. Read on for more information about these items. And if you’re planning on installing RFID tags in your workplace, here’s what you need to know.

Active RFID Tags Transmit Data at all Times

Active RFID tags are battery-power devices that continuously send and receive radio signals. These tags transmit data at high speeds and can track assets in real time. They come in different sizes and ranges, and typically have a few years’ battery life. Another advantage of active RFID is that they don’t require line of sight to communicate with a reader. In addition, they can generate data beyond simple positioning, such as ambient temperature and humidity. The cost of active RFID tags is much higher than passive ones.

Active RFID tags must withstand harsh environmental conditions, so they must be durable. Most active tags come with a rugged shell. Some of them also contain on-board sensors to track moisture levels, temperature, and other key identifiers. Active tags are also larger than passive tags. Active RFID tags must be placed on tracked items. However, this requirement makes them a better choice for sensitive assets and those with high-density RFID infrastructure.

Passive RFID Tags Require Line-of-Sight Reading

A passive RFID tag requires a line-of-sight read to activate, as the device must be within line-of-sight to activate. These tags are typically small and comprise an antenna, microchip, or integrated circuit. While this type of RFID tag has a longer range, it is more expensive and may not fit on small objects. Therefore, it is important to ensure that your passive RFID tags have line-of-sight reading.

While passive RFID tags use low-frequency (RF) radio waves to transmit information, active RFID tags use ultra-high-frequency (UHF) signals to communicate with each other. While passive RFID tags require line-of-sight reading, the cost per tag is usually low. A passive RFID tag can be use in applications where the distance is short. These tags can last for many years. Active RFID tags are more durable and are most used in applications such as race timing and toll payment transponder systems.

GPIO Adapters

If you need RFID accessories for your Raspberry Pi device, you can buy RFID Receiver for Raspberry Pi 2. It interfaces with the device’s antenna and reads the code at 9600 baud. This RFID Receiver comes with an I2C port and a 6-inch cable for remote mounting. The package includes an RFID Card or FOB, and a cable for remote mounting. If you are planning to use RFID in the future, you can also purchase RFID Reader/Writer Kit. This RFID reader/writer kit allows you to connect to a wireless network using WiFi or mobile devices.

Impinj GPIO adapters allow you to connect to four Speedway Antenna Hubs to one Impinj Speedway Revolution R420 Reader. The reader itself has four antenna ports and supports up to eight antennas. The Speedway Antenna Hub can control up to 8 RFID readers and offers software alerts. To make the most out of this kit, you will want to buy as many RFID antennas as possible.

Antenna Mounting Brackets

Antenna mounting brackets are essential parts of any RFID accessories system. Mounting brackets make installation easy. Whether the antenna is used indoors or outdoors, an antenna mounting bracket is an important accessory to consider. The following table lists several types of antennas mounting brackets and describes their uses. These brackets can be used with any antenna that meets the standard VESA pattern for mounting. Some types of antennas mounting brackets are available with M4 studs, M6 studs, or any combination thereof.

RFID Cable Tie in RFID Accessories

RFID cable ties have many applications. These ties are use to identify and track goods, such as products, packaging materials, and electrical equipment. RFID cable ties can be use in a variety of settings, including warehouse management, in-land transportation, and inventory. They can even be used for case tagging. For more information on RFID cable ties, contact your local distributor. Read more about the benefits of RFID cable ties below.

RFID cable tie tags are waterproof, allowing them to withstand harsh environments and cleaning processes. They store information up to ten years and can be read and rewritten without contact. Because of this, they’re great for asset management, tracking, and service and calibration. The ability to read multiple tags at once is a great benefit as well. In fact, the versatility of RFID cable ties is unmatched . You can use them to track a variety of items, from fragile assets to machinery.

Related Posts

Leave a Comment